Product ID:TT-P-38LE 7B MED CHROME YELLOW/OIL TP0403
MSDS Date:08/12/1986
FSC:8010
NIIN:00-281-3650
MSDS Number: BDSYJ

KALCOR COATINGS

37721 STEVENS BLVD
WILLOUGHBY, OH 44094-6231
US

Cage: DO396

KALCOR COATINGS COMPANY

WILLOUGHBY, OH 44094 US

Telephone: 800-424-9300 CHEMTREC

Cage: DO396

LEAD CHROMATE (OSHA PEL FOR LEAD FROM 29CFR

CAS: 7758-97-6

RTECS: GB2975000

Fraction By Weight: 65%

OSHA PEL 0.05 MG/M3 (PB)

ACGIH TLV: 0.05MG/M3(CR)A2;8990

MINERAL SPIRITS

CAS: 64742-88-7

Fraction By Weight: 5%

OSHA PEL OSHA PEL

ACGIH TLV: ACGIH TLV

Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Explanation of Carcinogenicity:ACGIH:SUSPECTED HUMAN CARCIARC:HUMAN
CARC(GROUP 1) NTP:KNOWN TO BE CARCINOGENIC
Effects of Overexposure:INHAL:(SOLVENTS)ANESTHETIC IRRIT OF THE RESP
TRACT OR ACUTE NERVOUS SYSTEM DEPRESS.CHARACTERIZED BY
HEADACHE.DIZZY,STAGGERING
GAIT.CONFUSION,UNCONSCIOUSNESS/COMA,(PIGMENT)REPET/PROLONGED EXPOS
MAY CAU SE DELAY EFFECTS INVOLV BLOOD, GASTROINTESTINAL, NERVOUS &
REPRODUCTIVE SYSTEMS.

First Aid:INHA:FUMES,REMOVE FROM EXPOS.RESTORE BREATHING.NOTIFY
PHYS.EYE:FLUSH IMMED W/COPIOUS QUANTITIES OF RUNNING H*2O FOR AT
LEAST 15 MIN. TAKE TO A PHYSICIAN FOR DEFINITIVE
MED.TREATMENT.SKIN:REMOVE W/ SOA P & H*2O.REMOVE CONTAM CLOTHING
THERE ARE NO FIRST AID MEASURES FOR LEAD INTOXICATION.

Flash Point:104F-40.0C
Lower Limits:1.0
Extinguishing Media:CO*2, FOAM, DRY CHEM
Fire Fighting Procedures:USE FULL PROTECTIVE EQUIP.INCLUDING SCBA
Unusual Fire/Explosion Hazard:KEEP AWAY FROM SOURCES OF IGNITION.CLOSED
CONT MAY EXPLOD,EXPOS TO EXTREME HEAT APPLY TO HOT SURFACE,SPEC
PRECAUT. LEAD CHROMATFS/ORGANIC COMP MAY CREATE HAZ.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION(FLAMES HOT
SURFACES & ELECTRICAL,STATIC OR FRICTIONAL SPARKS.AVOID BREATHING
VAPORS VENT AREA REMOVE W/INERT ABSORBENT & NON SPARKING TOOLS

Handling and Storage Precautions:DO NOT STORE ABOVE 120F STORE LG QT IN
BUILDINGS DESIGNED FOR STORAGE OF NFPA CLASS 2 FLAMMABLE LIQUIDS.
Other Precautions:DO NOT TAKE INTERNALLY CONT SHOULD BE GROUNDED WHEN
POURING DO NOT FLAME CUT, BRAZE OR WELD W/OUT NIOSH APPROVED RESP
OR APPROPRIATE VENT.

Respiratory Protection:OUTDOOR/OPEN AREAS,NIOSH MECHANICAL FILTER.
RESTRICT VENT AREA.NIOSH CHEMICAL/MECHANICAL FILTER TO REMOVE
COMBINATION OF PARTICULATE,GAS,VAPOR.CONFINED AREAS.NIOSH APPROVED
AIR LINE TYPE RESP OR HOODS
Ventilation:PROVIDE GENERAL DILUTION OR LOCAL EXHAUST VENT IN VOL &
PATTERN TO KEEP TLV OF MOST HAZ BELOW ACCEPTABLE LIMIT
Protective Gloves:REC
Eye Protection:SAFETY GLASSES OR GOGGLE
Other Protective Equipment:NONE
Supplemental Safety and Health
WT/GAL 16.4+-.5LB/GAL.

HCC:F4
NRC/State Lic Num:NA
Boiling Pt:B.P. Text:300-385F
Vapor Density:HEAV> AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:6+-

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Hazardous Decomposition Products:HEATED TO DECOMP AS IN WELDING WILL
PRODUCE FUMES CONT OXIDES OF CARBON,LEAD,+CHROMIUM

Waste Disposal Methods:DISPOSE OF IAW LOCAL,STATE & FEDERAL REGS.DO NOT
INCINERATE. PRODUCT MAY REQUIRE SPECIAL HANDLING AS A HAZARDOUS
WASTE

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.